doorking
   US Mail: P.O. Box 2713, Stateline, NV 89449

 Contractors Lic.  NV. #57900   CA #363787
Phone Hours (PST)   since 1978
7:30 to 4:00 Mon.-Fri.
 doorking   
 Why Buy from Upswung Corp.? 
Resource Partner Links

Upswung Corp a Leading Online Distributor and Manufacturer of Automated Gate Products.
Gate Operators

6002 Light Duty
6050/6100 Residential and Commercial
6300 Commercial and Industrial
6400 Underground
9050/9070 Residential and Light Commercial
9100 Commercial
9150 Commercial and Industrial
9210 Industrial/Maximum Security
9230 Industrial/Maximum Security
9310 Commercial and Industrial
V-Wheel
Accessories
 
Download
 
 
dks systems
 ADVANCED FEATURES
  • Self-adjusting, no maintenance magnetic limits.
  • Overlap feature for dual swing gate operation.
  • Designed with a built-in primary and secondary
    entrapment prevention system.
  • Ports for plug-in loop detectors.
  • Fail-safe release.
  • Tamper detect circuit.
  • DC Powered convenience open
    (Option on 6100 only).
  • Gate tracker reporting output.
  • Programming switches.
  • Built-in reset switch.
  • Built-in power On/Off switch.

 OPTIONS AVAILABLE WITH THESE OPERATORS
Bi-parting gate connection cable (6050 slave operator is shipped with 30-feet of cable; 6100 slave operator is shipped with 40-feet of cable.)
Post or pad mount - specify which.
DC powered convenience open (6100 only).
Plug-in loop detectors.
Heater kit for cold environments.
Surge suppressors.

Compliant with UL 325 and 991.   ETL Listed.   (Note: To be compliant with UL 325 and industry safety guidelines, additional secondary entrapment prevention devices may need to be installed with this gate operator.   Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.)

DKS Transmitters & Receivers
DKS Key Switches  
Button Switches 
DKS Slide Accessories 
Roller Guides  Gate Locks Kits  
Magnetic Locks  
DKS Gate Hardware

  
DoorKing 6050/6100 Residential
and Commercial
doorking
The Model 6050 and 6100 operators are designed to operate vehicular swing gates in residential and commercial applications.   These operators are designed so that they can be either pad or post mounted without any costly and time consuming field modifications.   You need to specify which mounting method when ordering.   The unique design of these operators allows the gate arm to be attached to the bottom rail of the gate.   This eliminates the need for any brackets to be welded to the face of the gate and creates an aesthetically pleasing installation.   The 6100 can be equipped with a factory installed DC Convenience Open option which will automatically open the gate in the event of a power outage.
7
Pad Mount
6
Post Mount
5   4
13.25"W x 12"H* x 23"D 13.25"W x 12"H* x 23"D  
DKS 6100 gate opener  
 
 
 
SPECIFICATIONS
 
Model 6050
  • Maximum gate width 10-feet.
  • Maximum gate weight 400 pounds*.  
    (*Assumes gate swings level and is in
    good condition with properly adjusted hardware.  
    Other external factors may affect the performance
    of the gate operator).
  • Swings gate 90 degrees in approximately 10-seconds.
  • 1/2 HP limited-duty motor.
  • 115 VAC, 4.3 Amps.
  • Class I applications.
  • Dimensions (operator only):
    13.25"W x 12"H* x 23"D   (* Height of operator only.  
    Actual height above ground is determined by
    which mounting method is used)
Model 6100
  • Maximum gate width 14-feet.
  • Maximum gate weight 500 pounds*.  
    (*Assumes gate swings level and is in good
    condition with properly adjusted hardware.  
    Other external factors may affect the performance
    of the gate operator.)
  • Swings gate 90 degrees in approximately 10-seconds.
  • 1/2 HP continuous-duty motor.
  • 115 VAC, 5.4 Amps.
  • Class I and Class II applications.
  • Dimensions (operator only):
    13.25"W x 12"H* x 23"D (28"D with convenience
    open option)   (* Height of operator only.  
    Actual height above ground is determined by
    which mounting method is used)
We are a DKS Authorized Sales & Service 
Distributor. Only buy from an authorized DKS
Distributor for parts and warrantee repair.
 
 
MODEL 6050 RESIDENTIAL SWING GATE OPERATOR-1/3 HP 
Swing Gate Accessories
PART # DESCRIPTION Internet Price
6050-080

6050 Master Operator - 1/3 HP, 115VAC
residential unit. Control board is mounted in the unit. Handles gates up to 10 feet long. Approx. 10 - 12 seconds to open gate 90°. Operator only - must select either post or pad mounting kit.

 Click for price
6050-081

6050 Slave Operator - 1/3 HP, 115VAC slave unit. Does not include control board. Operator only - must select either post or pad mounting kit.

 Click for price
2600-693

Post Mounting Kit - Required Part
Post mounting kit allows the operator to be mounted on pipes. Kit includes two 2 inch x 3 foot pipes and necessary hardware. Use this kit with the 6050 and 6100 operators only.

 Click for price
2600-691

Pad Mounting Kit - Required Part
pad mounting kit allows the operator to be mounted directly to a concrete pad. Kit includes mounting base and necessary hardware. Use this kit with the 6050 and 6100 operator only.

 Click for price
9405-010 DoorKing Plug-in 2 Channel Loop Detector Click for price
9406-010 DoorKing Plug-in 1 Channel Loop Detector  
MODEL 6100 RESIDENTIAL/COMMERCIAL SWING GATE OPERATOR 1/2HP Swing Gate Accessories
PART #

DESCRIPTION

 Internet Price
6100-080

6100 Master Operator - 1/2HP, 115VAC  commercial unit. Control  board is mounted in the unit. Handles gates up to 14 feet long. Approx. 10 -12 seconds to open gate 90°. Operator only - must select either post or pad mounting kit.

 Click for price
6100-081

6100 Slave Operator - 1/2HP, 115VAC commercial slave unit. Does not include control board. Operator only - must select either post or pad mounting kit.

 Click for price
6100-082

6100 Master Operator with Battery Back-up - Same as 6100-080 master unit but includes a battery powered drive system designed to open the gate during power outages.

 Click for price
6100-083

6100 Slave Operator with Battery Back-up - same as 6100-081  slave unit but includes battery powered drive system as described above. Operator only - must select either post or pad mounting kit.

 Click for price
2600-693

Post Mounting Kit - Required Part
 Post mounting kit allows the operator to be mounted on pipes. Kit includes two 2 inch x 3 foot pipes and necessary hardware. Use this kit with the 6050 and 6100 operators only.

 Click for price
2600-691

Post Mounting Kit - Required Part
pad mounting kit allows the operator to be mounted directly to a concrete pad. Kit includes mounting base and necessary hardware. Use this kit with the 6050 and 6100 operator only.

 Click for price
9409-010 DoorKing Plug-in 2 Channel Loop Detector Click for price
9410-010 DoorKing Plug-in 1 Channel Loop Detector Click for price
Click here for all our Gate Products at Main Store