|
Compliant with UL 325 and 991. ETL listed.
(Note:
To be compliant with UL 325 and
industry safety
guidelines, a secondary
entrapment prevention device(s) is required
to be installed with this gate
operator.
Your professional DKS system
installer can
provide you with more details on these
devices
and on current industry safety standards.)
|
|
|
 |
|
Model 9150
operators are designed to operate vehicular
slide gates in residential, commercial and
industrial applications. These operators are
designed so that they can easily be mounted in
the front, center or rear of the gate without
any costly and time consuming field
modifications. In addition, the operators can
be pad or post mounted to meet any installation
requirements. The 9150 can be equipped with a
factory installed DC Convenience Open option
which will automatically open the gate in the
event of a power outage. |
|
|
|
|
|
|
 |
Model 9150 with 1/2 HP
Motor
- Maximum gate length 30-feet.
- Maximum gate weight 1000 pounds*.
(*Assumes gate is on level ground, in
good condition with properly adjusted
hardware. Other external factors may affect the
performance of the gate operator. If DC
Convenience Open option is installed, maximum
gate
weight is 1300 pounds. Other external
factors may
affect the performance of the
gate operator.)
- 1/2 HP continuous-duty motor.
- 115, 230*, 460* VAC (*230 and 460 volt
units
use a step-down power transformer
to achieve 115
volt operating voltage.)
- Operator is shipped with chain brackets and
20-feet of #40 chain.
- Class I, II, III and IV applications.
- Dimensions: 15"W x 24"H x 16.5"D
Model 9150 with 1 HP
Motor
- Maximum gate length 45-feet.
- Maximum gate weight 1500 pounds*.
(*Assumes gate
is on level ground, in good
condition with properly
adjusted hardware.
Other external factors may
affect the
performance of the gate operator. If DC
Convenience Open option is installed,
maximum gate
weight is 1300 pounds.
Other external factors may
affect the performance
of the gate operator.)
- 1 HP continuous-duty motor.
- 115, 230*, 460* VAC
- Operator is shipped with chain brackets and
20-feet of #40 chain.
- Class I, II, III and IV applications.
- Dimensions: 15"W x 24"H x 16.5"D
|
|
|
|
We are a DKS
Authorized Sales & Service
Distributor.
Only buy from an authorized
DKS Distributor for parts and warrantee
repair.
|
|
